Loading... Please wait...

Add to Wish List

Click the button below to add the CV clamp kit (10 piece) to your wish list.

You Recently Viewed...

Our Newsletter

CV clamp kit (10 piece)

  • 304 grade stainless steel smooth band with rolled edges. Made in Germany. Size - small
  • 304 grade stainless steel smooth band with rolled edges. Made in Germany. Size - large
  • 304 grade stainless steel smooth band with rolled edges. Made in Germany. Back side view
0.70 LBS

Product Description

The minute you start lifting an IFS front end, you better keep a close eye on the CV boots!

OEM CV boot bands work fine at stock ride height but after being in that position for 8-10 years, they are exposed to a great deal of new stress from the increased angles a lift produces. OEM bands can not be tightened so if grease is starting to seep past the boot, it is only a matter of time before you will experience a CV joint failure. This is definitely a case where an ounce of prevention is worth a pound of cure. Once the joint fails you are looking at a $400-650 repair. The best solution is to replace the worn and tired clamps with bands that are strong, durable, safe to use on the soft rubber of the CV boot and adjustable. McMaster-Carr bands made for soft rubber are the best possible clamps for this application.

Compatible vehicles:

Toyota: 100 Series Land Cruiser (98-07), 4th Generation 4Runner (02-09)


-Made from Type 304 stainless Steel (both bolt and clamp)
-Rolled edges (will not bite into and cut OEM CV boot)
-Smooth band (will not imprint CV boot and then tear at it when tightened)
-Worm drive screw with no exposed back (protects CV boot)
-3/8' width (fits perfectly in the OEM boot band channel)
-Rated to 26.5 in-lbs torque
-Sized perfectly for both large and small end of OEM inboard/outboard boots
-Made in Germany


-Large clamp (4-4 3/4')
-Small clamp (1-1 5/8')


CV-10 (10 pcs) 4 large, 4 small clamps (plus 1 lg and 1 sm for use as spares/recovery gear). This is enough to re-band both axles and still have a spare of each.

With simple tools, both axles can be re-clamped in about 1 1/2 hrs.






Find Similar Products by Category

Write your own product review

Product Reviews

Previous | Showing reviews 11-16 of 16

  1. Great Product 5 Star Review

    Posted by on 11th Feb 2015

    I ordered this clamp set and received it promptly. Great product and quality German made. I installed a set on my refurbished Land Cruiser axle shaft.
    Highly recommended.

  2. Fast delivery, great product! 5 Star Review

    Posted by on 21st Dec 2014

    Used these on my 2003 LC cv boots. Great product, fast delivery, great service! Thanks PFRAN.

  3. Worked perfectly to re-boot CV 5 Star Review

    Posted by on 15th Aug 2013

    I got the reference for these clamps from the IH8MUD website. They arrived quickly and worked exactly as described to re-boot the CV on a 1999 Landcruiser. Simple to install and no extra special tool needed.

  4. Excellent 5 Star Review

    Posted by on 29th May 2013

    These are an excellent alternative to crimp and ear type clamps. Thank you for the great product, great customer service, and fast delivery. Definitely recommended!

  5. Easy to use! 5 Star Review

    Posted by on 28th May 2013

    The CV Clamps are genius and super easy to use, the best part is they are also reusable. You can re sung them if they ever come loose. They showed up very quickly in the mail and communication with PFran was great, (tracking, order status, etc)
    Thanks PFran!!

  6. 100 Series 5 Star Review

    Posted by on 8th Mar 2012

    I run a 2.75"+ lift on the front of my 100 Series Landcruiser. My CV boots have been leaking for quite some time. I have tried the cheap Home Depot hose clamps only to result in a cut boot. Which cost me several hundred in labor and parts to get fixed. I just installed these clamps from Paul and they are perfect. No leaking and the clamps will not cut the boot. I highly recommend these.

Previous | Showing reviews 11-16 of 16

Customers Who Viewed This Product Also Viewed