Loading... Please wait...

Toyota Installation Guides

80 Series interior LED kit - Install Instructions

 Materials:

  • Small thin blade screwdriver with blade wrapped in electrical tape
  • Latex gloves
  • Spare interior fuse
  • Medium phillips head screwdriver
Pre-Install notes:
 
  • These LED bulbs are polarity-sensitive. Rotate bulb 180 degrees if it does not appear to function.
  • Wearing latex gloves greatly reduces the risk of shorting the interior lighting system as a result of sweaty hands coming into contact with bulb connections.
Steps:
 
  • Dome/Map lights
    • Turn map light off.
    • Turn front and rear dome lights off.
    • Remove the light covers for the map light, middle dome light, rear dome light (if so equipped), and door courtesy lights (if so equipped). Bulb lenses have intentations showing where pressure should be applied to pry covers off.
    • Wait at least 5 minutes for the OEM bulbs to cool down.
    • Remove the bulbs for the map light, middle dome light, rear dome light (if so equipped). (latex gloves and/or fast food napkings provide a good gripping medium for pulling bulbs).
    • Insert your spring festoon adapters into the middle and rear (if so equipped) dome sockets. (Do not connect your LED panels to these spring adapters at this time)
    • Insert your map light 9mm bulb adapter into the map light socket. (Do not connect your LED panels to the 9mm adapter at this time).
    • Turn on the map light
    • Gently plug in your LED panel to the map light adapter. If the light turns on then firmly attach the connection. If the map light does not turn on, flip the LED panel-side connector (not the inserted spring adapter or the inserted spring adapter connection side) clockwise 180 degrees, verify that you have a working light and firmly attach the connection.
    • Peel the back adhesive covering paper/plastic (the side opposite of the LED panel) off of the LED panel and attach the LED panel to the inside of the lamp housing.
    • Replace the light cover for the map light.
    • Turn off map light
    • Turn on middle dome light and rear dome light (if so equipped)
    • Gently plug in your LED panel(s) to the dome light adapter(s). If the light(s) turn on then firmly attach the connection(s). If the dome lights do not turn on, flip the LED panel-side connector(s) (not the inserted spring adapter or the inserted spring adapter connection side) clockwise 180 degrees, verify that you have a working light and firmly attach the connection.
    • Peel the back adhesive covering paper/plastic (the side opposite of the 48 LED bulbs) off of the 48 LED panel(s) and attach the 48 LED panel(s) to the inside of the lamp housing(s).
    • Replace the light cover(s) for the dome light(s).
  • Doors
    • Remove the light covers for the door courtesy lights (if so equipped).
    • Wait at least 5 minutes for the OEM bulbs to cool down.
    • Remove OEM bulbs
    • Gently Insert a 10 LED door light into door socket. If it lights up then firmly plug in the connection. If it does not light up, pull the 10 LED bulb out of the socket and rotate it clockwise 180 degrees. Verify that you have a working door light and firmly secure the connection.
    • Replace the door courtesy light covers.